How to secure wireless home network ?

1. 1.     Connect to your router via your browser, by inputting something called a Gateway IP Address.
   
   
   a.     To find your Gateway IP Address and connect to it in Windows
   
   
   ·        Click Start > Run > type 'cmd' > Click 'Enter'
   ·        Once the Command Prompt window opens, type 'ipconfig /all' and hit 'Enter'
   ·        Locate the line labeled 'Gateway' and make note of the number that follows. It will look similar to '192.168.1.1'
   ·        Open Internet Explorer (or your favorite browser)
   ·        Enter the Gateway IP Address into the address bar and click 'Enter ‘
   
   
   b.    To find your Gateway  IP Address and connect to it on a Mac
   ·        Open your Finder and run 'Terminal' inside of Applications > Utilities
   ·        Once the terminal window opens, type 'ipconfig -a' and hit 'Enter'
   ·        Locate the line labeled 'Gateway' and make note of the number that follows. It will look similar to '192.168.1.1'
   ·        Open Safari (or your favorite browser)
   ·        Enter the Gateway IP Address into the address bar and click 'Enter'
   
   
   2.     Enable encryption on your access point. Using 128-bit encryption or higher makes your Wireless Network more secure. WEP and WPA are entirely different encryption schemes. WEP has been proven insecure and can be cracked in few minutes  using free utilities that can be downloaded from the Internet. Using at least WPA is recommended, because it is much more secure, but is sometimes a bit harder to set up correctly than WEP is, and isn't completely secure. Some older access points or wireless cards do not support WPA2. If you have one of these, it is recommended that you purchase a newer one that supports WPA2, depending on how important you consider your security.
   
   
   3.     Set the router access password. Anybody who gains access to the router configuration settings can disable the security you have set up. If you forget the password, most routers have a hardware reset that will restore all of the settings to factory defaults. The best option is to use a random sequence of the maximum length of characters - you only have to type that once, so it is not a big thing. When you connect to the router via LAN cable while setting it up, you can copy and paste the password onto the router and onto your local setting, so you never need to type it again
   
   
   ·         Use a secure password . Don't use easily guessed passwords for your WPA2 or router access passwords, such as "ABC123", "Password", or a string of numbers in order. Use something hard to guess that contains both upper and lowercase letters as well as numbers. Special characters such as !@#$% are not supported by some routers. The longer the key, the better, although the WPA2 key has a minimum and maximum length. Try to make a little mental effort -- good passwords might be hard to remember, but they are harder to crack.
   
   
   ·         If you use a weak key then even WPA and WPA2 can be easily cracked within a day using a combination of special precomputed tables and dictionary attacks. The best way to generate a secure key is to use an offline random number generator or write the entire alphabet in uppercase and lowercase and numbers 0-9 on separate pieces of paper, mix the paper up and randomly pick up pieces and return them, mixing them up again each time; each character you pull out becomes a character in your key. You can also try throwing a pair of dice and using the resulting numbers as your password.
   
   
   4.     Change the Service Set Identifier (the network name or "SSID") from the default to something unique. A default SSID indicates to hackers that the network was set up by a novice and that other options (such as the password) are also left as the default. Use a name you can remember and identify, as the SSID has no influence on the security of your network (not even if you choose not to broadcast it).
   
   
   5.  Create Machine AddressFilter List on a Home Router on your Access Point or router. A MAC (not to be confused with the computer model 'Mac') address is a code unique to every wireless networking card in existence. Find the MAC Address of Your Computer filtering will register the hardware MAC Address of your networked devices, and only allow devices with known MAC Addresses to connect to your network. However, hackers Spoof a MAC Address  and still enter your network, so MAC address filtering should not be used in place of proper WPA2 encryption.
   
   
   6.     Don't disable the 'SSID Broadcast'. Do not disable the 'SSID Broadcast' feature of your Access Point or router. This seems counter-intuitive, but it is actually a bad idea. Although this would make your network invisible to your neighbors, any determined hacker can still sniff out your SSID; and you are implicitly forcing your computer to shout out your SSID anywhere you are, while it is trying to connect to it. Anyone could then impersonate your router with that SSID, and get your credentials that way.
   
   
   7.     Disable remote login. The first router worm brute forces its way into the router in this manner. Most default usernames are set to Admin. It isn't hard for a virus/worm to crack the password if the username is known. The good thing is that routers normally have this disabled by default. Be sure to confirm that it is disabled when you first set up your router and periodically thereafter. If you need to update your router setting remotely, only set up access for the time you are going to be connected.
   
   
   8.      Disable wireless administrating. Finally, change the setting that allows administrating the router through a wireless connection to 'off' (meaning that you need to connect with a LAN cable for administration). This disables any wireless hacking into the router.

How to Cheat on 3D Pinball in Windows OS ?

•   Open Pinball on your computer and type in these on the keyboard (there isn't a text box) without quotation marks:

•   Type in "h" or "hidden test" to have 1'000'000'000 points, but you'll stay in 2nd place, and control the pinball with your mouse!

• Type in "gmax" for gravity well (the little hole in the middle of the screen)

• Type in "r" or "rmax" to be promoted

•   Type in "bmax" to never lose

• Type in "1max" to get an extra ball

• Type in "y" to make everything red. This one is just for fun.

• Type in "m" to show the amount of memory pinball is using. This one is just for fun

How to Add Cheats or Codes to a Game Shark?

• At the main menu, select "Expert Cheat Mode."

• If the game you want to add a cheat to is already shown, skip the next step.

• Press the options button and select "add." Type in the game name.

• Highlight the game you want to add a cheat to and press right.

• Press the options button and select "add." Type in your cheat description.

• Highlight your new cheat and press right.

• Press the options button and select "add." Type in the first line of your code.

• Repeat the last step until your cheat is complete, the press the back button.

• With a memory card inserted, press the start button and select an option. Your cheat(s) will be saved to the memory card(8MB)(Playstation2) in slot 1.